We make every effort to provide an accurate representation but images and colours may vary from the product.
KEIM Royalan® Dilution 0.25 Litre
Loading, please wait a moment...
- Typical delivery £4.95 + VAT typical delivery, Estimate Delivery
-
We'll deliver as soon as possible
Estimated dispatch by Mon 3rd Feb -
Arrange International Delivery
We can deliver worldwide - Note: Delivery times apply to orders up to 100kg to most UK areas, see delivery for details and restrictions.
Dilution and undercoat for the KEIM Royalan System.
- Masonry Paint
- Matt Finish
- Highly Breathable
- Lightfast, Colourfast
- Extreme Long Life
- Environmentally Friendly
Product Details
KEIM Royalan Dilution is a part of the KEIM Royalan paint system. It is used to dilute the first coat of KEIM Royalan paint.
It can also be used as a primer to reduce the porosity of lime render and other highly absorbant surfaces before the first coat of paint is applied.
Preparation
All loose, flaking and unstable materials must be removed back to a sound edge; edges should be feathered in using sand or emery paper.
Ensure that any paint materials left remaining and the underlying substrate are sound and adhering well.
Any glossy or shiny surfaces should be thoroughly flattened down using sand or emery paper to create a good key.
Treat any surfaces affected by mould, fungal or lichen growth and kill algae spores.
All surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust.
Application
After suitable preparation, the product can be applied by brush, roller or airless spray. It requires at least 12 hours to dry before application of subsequent coats.
Refer to application of KEIM Royalan paint for specific directions on usage of dilution.
Technical
- Coverage
- 6.5m² per Litre (approx.)*
- Drying Time
- 12 hours (minimum)
- Conditions
- Must not be applied at temperatures below 5ºC nor those in excess of 30ºC, nor if it is raining, or if there is an immediate likelihood of rain.
- Weight
- 0.25kg (approx.)
* Actual coverage will depend upon absorbency of the surface and method of application.