Suppliers of Lime Mortar, Lime Plaster & Building Conservation Materials 01642 430 099

Lime Mortar (NON-HYDRAULIC) Fine Stuff Union Jack Made in United Kingdom

£10.00 + VAT Cards Accepted
  • Typical delivery £6.95 + VAT typical delivery, Estimate Delivery
  • Availability: In Stock

Traditional off-white with a fine texture

  • Premixed Lime Mortar
  • Suitable for a 4mm+ Joint
  • 100% Natural and Breathable
  • Made with Matured Lime Putty
  • Quality and Consistency
  • Reusable Bucket (Recyclable)
  • CE Certified Product
  • Technical Support

Best suited for soft masonry* Masonry Density Chart

Non-hydraulic lime mortar is most suited to soft / low density building materials or masonry in poor condition that is prone to decay, crumble, scale or flake and where conservation is the principal requirement.*

Suitable for joints with a thickness of 4mm or more

Fine Stuff mortar has a fine texture and is suitable for bedding, pointing and repointing joints with a thickness of 4mm or more. Sometimes masonry has non-standard joints of varying thickness, this is very common with random stone walling. Where this is the case, find the narrowest joint in the structure and select a lime mortar suitable for that.

Product Details

High Standards

Non-hydraulic lime mortar is CE certified and is manufactured to British Standards BS EN 998-2:2016 following heritage guidelines.

Authentic, Pure and Simple

100% natural, breathable and sustainable. The mortar doesn't contain anything artificial, no additives or plasticisers and absolutely, certainly no cement.

Ready Mixed

Inside the bucket you'll find a ready mixed lime mortar that is made with matured non-hydraulic lime (commonly known as “lime putty” or “fat lime putty”).

Non-hydraulic lime mortars set by carbonation, very gradually. This characteristic gives the product a long shelf life providing that the material is kept sealed air-tight preventing carbonation.

The mortar may stiffen over time in storage but can be “knocked up” again and again to the ideal consistency providing it is stored correctly.

Economy & Convenience

These buckets are easy to handle and are popular for small jobs or for contractors who are constantly on the go.

Buy with Confidence

Lime mortars from Conserv come complete with clear, concise instructions and free technical support. Don't hesitate to call if you need any help.

Technical

Specification
BS EN 998-2:2016
Weight
10kg (approx.)
Hue
Off-White
Tone
Light
Texture
Fine Texture
Binder
Lime Putty
BS EN 459-1:2015
Aggregate
BS EN 13139-1:2015
Grading
Gf80
Bed size
4mm ≥
Density
1,525 kg/m³ ± (at 91 days)
Vapour permeability
0.92 grams / 100mm² / 24hrs ±
Compressive strength
0.75 N/mm² ± (at 91 days)
Flexural strength
0.74 N/mm² ± (at 91 days)
Resistance to freeze thaw
Very high
(10 cycles)
Resistance to sulphate exposure
High
(26-50 cycles)
Resistance to freeze thaw in sulphate conditions
Low
10 cycles
Capillary rise
Very high
(126-150mm in 6 hours)
Mortar durability class
1 to 2
Carbonation rate
High
Initial set
Overnight ±
Curing
2mm per calendar month ±
Shelf life
Indefinite Potentially Keep Sealed Airtight§

* Masonry density can vary by quarry, manufacturer, age and condition of material, this information serves only as a general guide, disclaimer.

** Exposure is approximated and can vary, this information is presented as a general guide, disclaimer.

Technical data is approximated as it can vary significantly depending on various factors, particularly weather conditions. The information presented outlines typical behaviour you might expect in the United Kingdom with ambient temperatures of 10°C in sheltered areas with low exposure to wind and moisture. The information is nevertheless useful to establish the relative properties and performance of different products, disclaimer.

The colour of the mortar will continue to lighten until it fully cures. This difference in colour can be quite dramatic. In good weather, the mortar will appear much lighter after 10 days.

§ Products must be sealed airtight in their packaging during. Material will stiffen over time when sealed but can be 'knocked up' back to a workable state.

Disclaimer It is the customer's responsibility to determine the suitability of this product. Samples should be prepared and approved before complete application of this product. Appropriate testing should be undertaken prior to application where compressive strength or density are a critical factor.