Suppliers of Lime Mortar, Lime Plaster & Building Conservation Materials 01642 430 099

Hydraulic Lime Render Finish Coat Union Jack Made in United Kingdom

£12.95 + VAT Cards Accepted
  • Typical delivery £8.95 + VAT typical delivery, Estimate Delivery

Taupe with a slight hint of salmon, this lime render has a fine textured finish.

  • Finish Coat, also known as Top Coat or Skim Coat
  • Simple to Use
  • Ready to Mix, Add Water
  • 100% Natural and Breathable
  • Quality and Consistency
  • CE Certified

Product Details

High Standards

Hydraulic Lime Render is CE certified and is manufactured to British Standards BS EN 998-1:2016 following heritage guidelines.

Authentic, Pure and Simple

100% natural, breathable and sustainable. The render doesn't contain anything artificial, no additives or plasticisers and absolutely, certainly no cement.

It's All Inside the Bag

All the materials you need are packed inside:

  • Natural Hydraulic Lime (NHL)
  • Blended Sands & Aggregates

The lime, sands and aggregate are carefully selected and sourced from around the British Isles.

Easy to Mix

Mixing the render is really simple. All you need to do is stir the lime and aggregate together, then add clean water and mix to the correct consistency.

The product is mixed in its entirety using all the aggregate and natural hydraulic lime provided, this ensures consistent appearance and performance.

There is generally sufficient time to work with the mortar before it reaches an initial set. A little water can be added to the mortar as required throughout the day to keep it workable.

Integrity is Everything

As a heritage product, the hydraulic lime render's performance depends on the integrity of the natural material.

The tough, waterproof packaging keeps the material in perfect condition which is critical given it's hydraulic nature.

The material is not compromised in damp or wet conditions. It is also protected from internal condensation in hotter temperatures.

Economy & Convenience

These bags are popular with building contractors as they're economical and practical for projects large and small.

Orders for 8 or more bags are typically delivered using the UK's largest pallet network companies to keep delivery costs to a minimum.

If space is tight on-site you can call us to arrange partial delivery of your goods on different dates. We'll find a solution that works best for you.


BS EN 998-1:2016
25kg (approx.)
Fine Texture
NHL 3.5
BS EN 459-1:2015
BS EN 13139-1:2015
1,650 kg/m³ ± (at 91 days)
Vapour permeability
0.74 grams / 100mm² / 24hrs ±
Compressive strength
3.44 N/mm² ± (at 91 days)
Flexural strength
1.31 N/mm² ± (at 91 days)
Resistance to freeze thaw
(10-25 cycles)
Resistance to sulphate exposure
Very high
(>50 cycles)
Resistance to freeze thaw in sulphate conditions
10-25 cycles
Capillary rise
(76-100mm in 6 hours)
Mortar durability class
3 to 4
Carbonation rate
Initial set
Overnight ±
90 days ±
Shelf life
Use within 12 months of purchase§

* Masonry density can vary by quarry, manufacturer, age and condition of material, this information serves only as a general guide, disclaimer.

** Exposure is approximated and can vary, this information is presented as a general guide, disclaimer.

Technical data is approximated as it can vary significantly depending on various factors, particularly weather conditions. The information presented outlines typical behaviour you might expect in the United Kingdom with ambient temperatures of 10°C in sheltered areas with low exposure to wind and moisture. The information is nevertheless useful to establish the relative properties and performance of different products, disclaimer.

The colour of the mortar will continue to lighten until it fully cures. This difference in colour can be quite dramatic. In good weather, the mortar will appear much lighter after 10 days.

§ Products should be stored with packaging unopened, natural hydraulic lime is vulnerable once open and exposed.

Disclaimer It is the customer's responsibility to determine the suitability of this product. Samples should be prepared and approved before complete application of this product. Appropriate testing should be undertaken prior to application where compressive strength or density are a critical factor.